Back to list

AnyMachine

Working mechanical rigs from a generated mesh: hinges, legs and soft goods, every control a 0-1 parameter.

电量还有一格
Author
@电量还有一格
Project ShowcaseDesign & CreativeOnlineclaude-code
0
0

Project intro

AnyMachine builds machines that actually move, in Blender, from an AI-generated mesh. Give it an object — a reference image, or a static mesh from a kit — and it hands back a rig that works: a laptop lid on a real hinge, legs that walk without sliding, a bag that fills and opens. Every control is a 0-1 parameter, and every result is checked by machine before anyone looks at it.

The trick is to treat the generated mesh as a skin: measure the joint axes off it, then rebuild the moving parts as clean geometry on those axes, so nothing can pass through anything. Each joint gets a 0-1 custom property with drivers and limits, and bakes to linear glTF actions, so any engine can pose the model. Then every parameter is swept for triangle overlaps, out-of-range values are clamped, and foot slip is measured.

The proof is six runs in the repo. Stilt is a 30 m walker with 160 parts, a 104-bone rig and 14 hydraulic actuators, built by one Python script in about 80 seconds. A helicopter with a full rotor head comes in at 31,477 triangles, beside a lifeboat, 12 pieces of oil-rig equipment, 19 light fixtures and 3 rifles. The laptop hinge sweeps 0-135 degrees with 0 overlaps and 0.32 mm minimum clearance; the quadruped trots with 0.014 mm of foot slip. It has 401 stars on GitHub with 37 forks, was created on 4 November 2026, and was still being pushed on 17 November 2026.

Two honest limits: the author calls this experiments, not a product — there is no endpoint yet, and the backpacks only partly work, with soft goods still needing their own joint types. And the results are plainer than their reference sheets in places; the notes say exactly where.

Actions

Visit project URL

Tech stack

blenderpython

Project info

Project category
Design & Creative
Project status
Online
Collaboration intent
None

Comments (0)

ME
0/1000
Loading comments...