Back to list

nv-uefi-unlocker: Unlock Your NVIDIA GPU's Power Limits Before the OS Boots

Unlock NVIDIA power and voltage limits before the OS boots — read-back verified on RTX 20/30/40 cards. More than 2,500 stars on GitHub.

丁望舒
Author
@丁望舒
Project ShowcaseToolsOnline
0
0

Project intro

NVIDIA locks the power and voltage limits of most GeForce cards in firmware, and the official tools will not let you past them. nv-uefi-unlocker works one level lower: it runs before the operating system boots and lifts those limits from the UEFI side, so the card can use the headroom its silicon already has. More than 2,500 people have starred it on GitHub since it appeared in late October 2026.

What sets it apart is how carefully it treats the write path. Every change is first checked in a behavior simulator, then written only after the card reads the new values back and confirms them — and each verified card gets its evidence filed in the repo. The project reports real-machine checks across most RTX 20, 30 and 40 series cards, including some laptop and mining cards, and it ships a read-only pre-check tool so you can see whether your machine is in scope before touching anything.

It is written in Rust and works on Windows, Linux, Hackintosh and any EFI-bootable system. The unlock covers power limits and voltage walls, with measured gains published per card — an RTX 3080, for example, is reported at roughly 1.65–1.74× on FP16/BF16 work after unlocking — though the exact gain depends on the card, cooling and power supply.

Read this before you try it: this tool changes firmware, and that carries real risk. The author is explicit that pushing power and heat well past the factory envelope can damage a card or void its warranty, and that you must confirm your cooling and power headroom first. It is built for overclockers and hardware tinkerers who understand those stakes, not for a general audience.

Actions

Visit project URL

Tech stack

rust

Project info

Project category
Tools
Project status
Online
Collaboration intent
None

Comments (0)

ME
0/1000
Loading comments...