ZigZag
A free, open-source embroidery editor — turn SVG artwork into stitches, edit them visually, and send designs to a Brother Skitch over Bluetooth.
ZigZag is a free, open-source embroidery editor for Mac, Windows, and Linux. You draw in the studio, import SVG artwork, or let an AI agent draw through the built-in MCP server, then fine-tune every stitch on screen and export PES, DST, EXP, JEF, or VP3 files that work with most embroidery machines — or send a design straight to a Brother Skitch PP1 over Bluetooth. It started with a $300 machine and a $12-a-month app: the author bought a Brother Skitch, found its companion software weak and paywalled, and built her own editor instead. The studio covers eleven stitch types, a density map that shows where stitches pile up, and a command-line tool that runs the same Rust engine outside the editor. The project passed 900 stars in under three weeks, with 742 points on Hacker News, and version 0.1.5 shipped on 15 November 2026. It is tested on a real Skitch PP1 — 136 library tests and 153 editor and MCP tests — and every export format is read back through pyembroidery at identical stitch positions. Two honest limits: only the Skitch PP1 gets the direct Bluetooth link — every other machine takes an exported file on a USB stick. And this is still an early 0.1.x release: the machine protocol was reverse-engineered, the author advises against Skitch firmware updates, and gradient fills, built-in fonts, and multi-hooping are listed as not yet built.